Dr.-Ing. Mario Kusch

Dr. Mario Kusch is the Senior Engineer at the Chair of Welding Technology at Chemnitz University of Technology, Chemnitz/Germany. His working field is the applied research of arc welding processes.

7 articles

Role of flux oxide slags in the mechanism of the formation of weld beads during the A-TIG welding of stainless steels

Dr. Rustam M. Saidov, Dr.-Ing. Mario Kusch, Prof. Dipl.-Ing. Dr. techn. Peter Mayr, Dr.-Ing. Kevin Hoefer, Durdona Komilova

Issue 6 (2019)

Specialist Articles, 450 - 457

Studying the influence of flux physical and chemical properties on aluminium alloys weld quality

Dr. Rustam M. Saidov, Fatima Rakhimova, Dr.-Ing. Mario Kusch, Björn John

Issue 1 (2013)

Specialist Articles, 44 - 48

Causes and assessment of irregularities of MIGïºarcïºbrazed joints

Dr.-Ing. Mario Kusch, Dipl.-Ing. Frank Podlesak

Issue 4 (2012)

Specialist Articles, 250 - 252

The effect of flux on formation of the primary structure of TIG welds made on aluminium and aluminium alloys

Dr. Rustam M. Saidov, Prof. Rustambek Abdurakhmanov, Dr. Damir Tadjiev, Dr.-Ing. Mario Kusch, Björn John

Issue 4 (2011)

Specialist Articles, 248 - 252

Application of the plasma-MIG technology for the joining of galvanised steel materials

Dr.-Ing. Stefan Thurner, Dr.-Ing. Mario Kusch

Issue 1 (2008)

Specialist Articles, 54 - 61

Investigation of the peculiarities of the formation of the weld beads on highly resistant steels during TIG and A-TIG welding – Part 1: Influences of the surface conditions of welded plates

Dr. Rustam M. Saidov, Dr.-Ing. Mario Kusch, Dr.-Ing. Kevin Hoefer, Fatima Rakhimova

Issue 2 (2022)

Specialist Articles, 114 - 118

Investigation of the peculiarities of the formation of the weld beads on highly resistant steels during A-TIG welding – Part 2: Influences of the physical and chemical properties of activating fluxes on the formation of the weld beads during TIG and A-TIG welding

Dr. Rustam M. Saidov, Durdona Komilova, Dr.-Ing. Mario Kusch, Dr.-Ing. Kevin Hoefer, Dr. Nilufar R. Avezova, Prof. Dilbara D. Gulamova

Issue 4 (2022)

Specialist Articles, 264 - 271

Dr.-Ing. Mario Kusch

More content

Welding and Cutting

Issue 4 (2022)

Welding and Cutting

Issue 2 (2022)

Welding and Cutting

Issue 6 (2019)

DVS Media GmbH

More Journals

Newsletter subscription

Dr.-Ing. Mario Kusch

7 articles

Role of flux oxide slags in the mechanism of the formation of weld beads during the A-TIG welding of stainless steels

Studying the influence of flux physical and chemical properties on aluminium alloys weld quality

Causes and assessment of irregularities of MIGïºarcïºbrazed joints

The effect of flux on formation of the primary structure of TIG welds made on aluminium and aluminium alloys

Application of the plasma-MIG technology for the joining of galvanised steel materials

Investigation of the peculiarities of the formation of the weld beads on highly resistant steels during TIG and A-TIG welding – Part 1: Influences of the surface conditions of welded plates

Investigation of the peculiarities of the formation of the weld beads on highly resistant steels during A-TIG welding – Part 2: Influences of the physical and chemical properties of activating fluxes on the formation of the weld beads during TIG and A-TIG welding

More content

Welding and Cutting

Issue 4 (2022)

Welding and Cutting

Issue 2 (2022)

Welding and Cutting

Issue 6 (2019)

DVS Media GmbH

More Journals

Newsletter subscription

Causes and assessment of irregularities of MIGïºarcïºbrazed joints