- Welding and Cutting
- Authors
- Prof. Dr.-Ing. Prof. h. c. Stefan Böhm
Prof. Dr.-Ing. Prof. h. c. Stefan Böhm
Univ.-Prof. Dr.-Ing. Prof. h.c. Stefan Böhm is the Head of the Department for Cutting and Joining Manufacturing Processes (tff) at the University of Kassel.
10 articles
Induction-assisted laser beam welding of cast iron materials - Microstructure and mechanical propertiess
M.Sc. Dipl.-Wirtsch.-Ing. Malte Vollmer, Dipl.-Ing. Gabriel Mienert, Prof. Dr.-Ing. Martin Fehlbier, Prof. Dr.-Ing. Prof. h. c. Stefan Böhm, Prof. Dr.-Ing. Thomas Niendorf
Specialist Articles, 316 - 320
Thermographic methods for non-destructive quality assurance during friction stir welding
Dipl.-Ing., IWE Igor Kryukov, Schüddekopf Sven, Rebensdorf Anatoli, Prof. Dr.-Ing. Prof. h. c. Stefan Böhm, Dipl.-Ing. Malte Mund, Dr.-Ing. Stefan Kreling, Prof. Dr.-Ing. Prof. h. c. Klaus Dilger
Specialist Articles, 374 - 378
Study on the effect of hot spots generated by induction heating to prevent hot cracking during laser welding of the aluminum alloys AA6082T6 and AA5754H22
Dipl.-Ing. Stefan Holland-Moritz, Somonov Vladislav, Dipl.-Ing. Stephan Völkers, Dipl.-Ing. Markus Geyer, Prof. Dr.-Ing. Prof. h. c. Stefan Böhm
Specialist Articles, 310 - 318
Development of an online quality assurance method based on acoustic emissions using magnetic pulse welding
Markus Graß, M. Sc. Carsten Bruckhaus, Hans-Hermann Kaufmann, Dr. Hubertus Siebald, Dipl.-Ing. agr. MEng Quality Management Boris Kulig, Prof. Dr.-Ing. Prof. h. c. Stefan Böhm, Prof. Dr. Oliver Hensel
Specialist Articles, 214 - 219