Prof. Dr.-Ing. Uwe Reisgen

Professor Dr. Ing. Uwe Reisgen, born in Eschweiler on September 26, 1962, studied Mechanical Engineering at RWTH Aachen University and achieved the final qualification of Dipl. Ing. in 1990. He subsequently worked as a scientific employee at the Institute for Welding Technology at RWTH Aachen where he obtained his Dr. Ing. doctor\'s degree in 1995. From 1995 to 2000, Reisgen was employed as a senior engineer at the Institute for Welding Technology at RWTH Aachen University and, since 2000, he has been the Head of the Joining and Testing Technology Department at the Jülich Research Centre. In 2007, he was appointed as a university professor at the Institute for Welding Technology and Joining Technology at RWTH Aachen University and as the director of the institute with the same name.

24 articles

Modelling and prediction of welding parameters for electron beam welding and laser beam welding in vacuum

M. Sc. Thomas Krichel, Dr.-Ing. Simon Olschok, Prof. Dr.-Ing. Uwe Reisgen

Issue 4 (2021)

Specialist Articles, 328 - 333

Possibilities for raising the economic viability of submerged arc single-wire processes using plasma arc assistance

Prof. Dr.-Ing. Uwe Reisgen, M. Sc. Rahul Sharma, Dipl.-Ing. Lukas Oster

Issue 5 (2019)

Specialist Articles, 380 - 383

Investigations to increase process reliability in GMA welding by laser beam stabilisation

Prof. Dr.-Ing. Uwe Reisgen, Dr.-Ing. Stefan Kaierle, M. Sc. Rahul Sharma, Dipl.-Ing. (SFI) Jörg Hermsdorf, Dr. Ing. Erik Zokoll, M. Sc. Jan Leschke

Issue 2 (2019)

Specialist Articles, 125 - 129

Depth profile analysis of oxide layers on aluminium filler wire by means of glow discharge optical emission spectroscopy

Dipl.-Ing. Stephan Wieland, Dipl.-Ing. Konrad Willms, Prof. Dr.-Ing. Uwe Reisgen, Dipl.-Ing. (FH) Rüdiger Meihsner, M. Sc. Tatjana Leibßle

Issue 3 (2018)

Specialist Articles, 217 - 221

Optimisation of gas metal arc welding processes in automation using surrogate models

Prof. Dr.-Ing. Uwe Reisgen, Dipl.-Ing. Konrad Willms, Dipl.-Ing. Guido Buchholz, B. Sc. Chika Koyama, Dipl.-Inf. Daniel Herfert

Issue 1 (2018)

Specialist Articles, 48 - 54

Laser beam submerged arc hybrid welding for thick metal sheets

Prof. Dr.-Ing. Uwe Reisgen, Dr.-Ing. Simon Olschok, Dr.-Ing. Oliver Engels, Dr. Yingyot Aue-u-Ian

Issue 6 (2017)

Specialist Articles, 382 - 386

Suitability of gas additives for use as flux in arc brazing

Prof. Dr.-Ing. Uwe Reisgen, Dipl.-Ing. Guido Buchholz, Dipl.-Ing. Konrad Willms

Issue 5 (2017)

Specialist Articles, 328 - 332

Pulsed submerged arc welding in order to reduce the hydrogen input during the welding of high-strength fine-grained structural steels

Dipl.-Ing. Johannes Schäfer, Dipl.-Ing. Konrad Willms, Prof. Dr.-Ing. Uwe Reisgen

Issue 4 (2015)

Specialist Articles, 228 - 233

Experimental determination of the current density and stagnation pressure distributions at the focal spot of a TIG arc

Dr.-Ing. Antonius Antoniou, Dr.-Ing. Lars Stein, Prof. Dr.-Ing. Uwe Reisgen, Prof. Dr.-Ing Hans-Willi Langenbahn

Issue 1 (2015)

Specialist Articles, 36 - 42

Characterisation of the biological effect of ultrafine particles in welding fumes after controlled exposure - Effect of the MIG welding of aluminium and the MIG brazing of zinc-coated materials

Dr.-Ing. Vilia Elena Spiegel-Ciobanu, Dr. phil. nat. Peter Brand, PD Dr. med. Monika Gube, Dipl.-Ing. Klaus Lenz, Prof. Dr.-Ing. Uwe Reisgen, Prof. Dr. med. Thomas Kraus

Issue 3 (2014)

Specialist Articles, 171 - 176

Laser/GMA hybrid welding with the aid of lowïºenergy arcs

Prof. Dr.-Ing. Uwe Reisgen, Dr.-Ing. Simon Olschok, Dipl.-Ing. Michael Mavany

Issue 1 (2014)

Specialist Articles, 52 - 56

Modified shielding gas flow in order to influence the transfer of droplets

Prof. Dr.-Ing. Uwe Reisgen, Dr.-Ing. Lars Stein, Dr.-Ing. Dirk Kampffmeyer, Prof. Dr.-Ing. habil. Uwe Füssel, Dr.-Ing. Martin Hertel, Dr.-Ing. Michael Schnick, Dipl.-Ing. Sebastian Jäckel

Issue 4 (2013)

Specialist Articles, 251 - 257

Modelling and visualisation of the GMA processes

Prof. Dr.-Ing. Uwe Reisgen, Dr.-Ing. Markus Schleser, Dr.-Ing. Oleg Mokrov, M.Sc. Alexander Zabirov, Prof. Dr.-Ing. habil. Uwe Füssel, Dr.-Ing. Michael Schnick, Dr.-Ing. Martin Hertel, Sebastian Jaeckel

Issue 4 (2012)

Specialist Articles, 242 - 249

Materialïºadaptive joining of highïºstrength pipeline structural steels, X100 quality, under field conditions

Prof. Dr.-Ing. Uwe Reisgen, Dipl.-Ing. Guido Buchholz, Dipl.-Ing. Konrad Willms

Issue 3 (2012)

Specialist Articles, 188 - 192

Utilisation of surrogate modelling in self-optimisation methods of gas metal arc welding processes

Prof. Dr.-Ing. Uwe Reisgen, M. Beckers, Dipl.-Ing. Konrad Willms, Dipl.-Ing. Guido Buchholz, Dr. Dirk Gorissen, Prof. Dr. Tom Dhaene

Issue 6 (2011)

Specialist Articles, 382 - 389

Development of a cost-effective seam tracking system for the automated GMA welding of aluminium alloys

Prof. Dr.-Ing. Uwe Reisgen, Dr.-Ing. Lars Stein, Dipl.-Ing. Christoph Geffers, Prof. Dr.-Ing. Prof. h. c. Klaus Dilger, Dr.-Ing. Thomas Nitschke-Pagel, Dipl.-Ing. Hamid Babory

Issue 4 (2011)

Specialist Articles, 240 - 245

Vibration behaviour of steel-aluminium mixed joints executed with a modified GMA short arc process

Prof. Dr.-Ing. Uwe Reisgen, Dr.-Ing. Lars Stein, Dr.-Ing. Marius Steiners, Prof. Dr.-Ing, Wolfgang Bleck, Dr.-Ing. Pawel Kucharczyk

Issue 1 (2011)

Specialist Articles, 58 - 61

Laser beam welding in vacuum - A comparison with electron beam welding

Prof. Dr.-Ing. Uwe Reisgen, Dr.-Ing. Simon Olschok, Dipl.-Ing. Stefan Longerich

Issue 4 (2010)

Specialist Articles, 224 - 233

Surrogate modelling in GMA pulsed arc weldin

Prof. Dr.-Ing. Uwe Reisgen, M. Beckers, Dipl.-Ing. Guido Buchholz, Dipl.-Ing. Konrad Willms, Juliane Lose, Robert Schmitt

Issue 1 (2010)

Specialist Articles, 46 - 51

Fracture behaviour of resistance spot welds on high-strength and higher-strength steel sheets

Prof. Dr.-Ing. Uwe Reisgen, Dipl.-Ing. Alexander Harms, Dr.-Ing. Peter Ohse, Dr.-Ing. Alexander Schiebahn

Issue 3 (2009)

Specialist Articles, 148 - 153

Arc sensor system for narrow gap GMA welding with a strip electrode and magnetic deflection of the arc

Prof. Dr.-Ing. Uwe Reisgen, Prof. Dr.-Ing. Ulrich Dilthey, Dipl.-Ing. Michael Drepper

Issue 3 (2008)

Specialist Articles, 146 - 155

Improving the resistance to hot cracking during the welding of nickel-based alloys using cold wire submerged arc welding processes

Prof. Dr.-Ing. Uwe Reisgen, Prof. Dr.-Ing. Ulrich Dilthey, Dipl.-Ing. Ivan Aretov

Issue 2 (2008)

Specialist Articles, 90 - 103

Increase in understanding of the welding process through simulation of laser beam and gas-shielded metal arc welding

Dr.-Ing. Oleg Mokrov, Dipl.-Phys. Marek Simon, M. Sc. Rahul Sharma, Prof. Dr.-Ing. Uwe Reisgen, M. Sc. Christoph Schöler, Dr. rer. nat. Markus Nießen, Prof. Dr. rer. nat. habil. Wolfgang Schulz

Issue 1 (2022)

Specialist Articles, 56 - 63